Full-auto bending machine
Full-auto bending machine
PLC control equipment state, man-machine interface set parameters; Equipment for indoor use only; Different shape types can be bent according to customer requirements.
Quantity:
The safe operation of the automatic pipe bending machine is as follows: First, in the core bending mode during the operation of the automatic pipe bending machine, before the bending arm returns, the operator must ensure that the core head is inside the pipe, or ensure that the core shaft is not blocked when the bending arm returns, otherwise, the core head or the core rod may be bent or broken.
2. When manually adjusting the speed of the side push cylinder, the rotor arm should be adjusted when it is rotated to ≥900. The adjustment speed is the synchronization of the linear speed of the rotating arm rotating the edge of the bending mold. However, it should be noted that when adjusting the fully automatic pipe bending machine (mold), the adjuster should press the button to adjust it by himself. One person must not adjust on the fully automatic pipe bender while the other person operates on the control cabinet. And adjust the fully automatic pipe bending machine, the core rod should be removed when the pipe bending machine or empty car.
When the pipe bending machine is working, all personnel are prohibited from entering the space scope swept by the rotating arm and pipe fittings, that is, when the fully automatic pipe bending machine is started, pay attention to the human body shall not enter the scope swept by the rotating arm.
Fourth, the general automatic pipe bending machine should check the tightness of the chain after a period of time, and maintain the tightness of the upper and lower chain.
2. When manually adjusting the speed of the side push cylinder, the rotor arm should be adjusted when it is rotated to ≥900. The adjustment speed is the synchronization of the linear speed of the rotating arm rotating the edge of the bending mold. However, it should be noted that when adjusting the fully automatic pipe bending machine (mold), the adjuster should press the button to adjust it by himself. One person must not adjust on the fully automatic pipe bender while the other person operates on the control cabinet. And adjust the fully automatic pipe bending machine, the core rod should be removed when the pipe bending machine or empty car.
When the pipe bending machine is working, all personnel are prohibited from entering the space scope swept by the rotating arm and pipe fittings, that is, when the fully automatic pipe bending machine is started, pay attention to the human body shall not enter the scope swept by the rotating arm.
Fourth, the general automatic pipe bending machine should check the tightness of the chain after a period of time, and maintain the tightness of the upper and lower chain.
Full-auto bending machineFull-auto bending machineFull-auto bending machineFull-auto bending machineFull-auto bending machineFull-auto bending machine
Full-auto bending machineFull-auto bending machineFull-auto bending machine
